SBS MIC-IT Microphone preamp

SBS MIC-IT Microphone preamp

2.351 DKK

Dual microphone pre-amp with phantom power
Model/Varenr.: XX-SBS-Mic-It
Lagerstatus: Spørg venligst om leveringstid
A high-performance dual microphone preamplifier with multiple output modes.

The Mic-IT offers a professional upgrade for systems in which a microphone input is not available or is of insufficient quality.

Cost and space constraints often compromise the performance of preamplifiers fitted to inexpensive mixing desks, portable digital recorders and PC soundcards. External microphone preamplification from a Mic-IT can noticeably enhance overall performance, giving a wider range of gain and a reduction of noise levels.

Other applications include the matching of quality balanced microphones to unbalanced inputs without degradation, line driving for OBs or remotely situated microphones, and the conversion of spare mixer line channels to accept microphone inputs.

A novel output mode switch provides two extra functions for specialised or occasional requirements. The line level outputs may be summed, creating a two input microphone mixer - perhaps to feed a PA system - and a sum and difference mode supports the renewed interest in Middle+Side recording (for a line level M+S decoder, see Line-IT). There are also front panel switches to assign 48V phantom power and a powerful hum and rumble rejecting high-pass filter to one or both of the inputs.

The Mic-IT is packaged in a robust metal case suited to mounting on rack shelves, beneath woodwork or inside rack cabinets by means of screws, ties or sticky pads. It is supplied with a mains lead, comprehensive instructions and a five year warranty.

Input/output Electronically balanced
Maximum input level -6dBu
Phantom power 48V switchable
Input impedance >5k Nominal gain range 33 to 75dB Equiv.
Input Noise (RMS) -129dB at 60dB gain
THD 1kHz 0.005% 40dB gain
Input CMRR >60dB
AF response <±0.1dB (50Hz-20kHz)
Selectable HP filter -3dB at 80Hz, -12dB/Octave
Maximum output level +26dBu with 10k load +25.5dBu with 600 Ohm load
Power supply 230V AC ±10%
Dimensions (exc. switches & connectors) 294mm x 114mm x 44mm
Fixing centres 5mm holes on 276mm x 74mm rectangle
Power consumption < 6VA
Weight 800g (1kg packed)
Warranty 5 Years

Produktets tags

Der er ingen tags registreret.

Mine tags

Kunder der har købt dette produkt har også købt