Tilbud
EuroCaster TX600/400V UHF TV Transmitter 400W RMS /600W P.S.

EuroCaster TX600/400V UHF TV Transmitter 400W RMS /600W P.S.

89.158,00 DKK 99.077,00 DKK

high-efficiency UHF TV Transmitter, Air cooling, 2RU

Model/Varenr.: EC-TX600/400V-UHF
Styk

EuroCaster´s Single channel AIR COOLED UHF TV Transmitter

TX600/400V is an all-in-one transmitter, fully supporting DVB-T/H, DVB-T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL and NTSC modulations (dual-cast Analog and Digital is also supported), able to provide an output power up to 400W rms or up to 600W p.s.

It comes as an ultra compact chassis available in 2U 19” rack, with adaptive pre-correction circuits natively offered and built in GPS/GLONASS receiver for accurate synchronization and SFN operations.

 

Different input interfaces can be configured (Satellite Receiver, ASI, ETI, EDI, Gigabit Ethernet or RF), which makes OneCompact the perfect flexible platform to cover the different applications of any Digital network (terrestrial or satellite fed transmitter, re-generative repeater, on channel gapfiller, transposer, etc.).

 

Main features:

  • Compact 2U 19” Rack chassis
  • Output Power up to 400W rms in digital or up to 600 W p.s. in analogue
  • High efficiency wideband or broadband amplifier technology both in UHF and VHF bands
  • DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL, NTSC, NICAM modulations fully supported
  • Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDB-Tb
  • Adaptive pre-correction circuits
  • Powerful echo canceller when OneCompact is used as an on-channel repeater
  • Optional internal demodulator with equalizer for regenerative transposers
  • Equalized Digital On-Channel Repeater (Spectrum Restorer) configuration available
  • On-board high stability GPS / GLONASS receiver with battery
  • Flexible input interfaces:
    • 4 x ASI inputs (TS, BTS, T2MI, SMPTE-310M) + Analog input
    • 2 x ASI inputs and 2 x Gigabit Ethernet
    • 4 x ETI or 2 x ETI + 2 x EDI inputs
    • 1 x DVB-S/S2 Satellite Receiver input
    • 1 x RF input
  • SNMP, Web Interface and Touch Screen display

 

 

 

*The pictures shown related to this transmitter is only for illustration purpose. The specific configuration of the transmitter can be different from the picture 

 

 

Transmitters Specifications:

UHF digital output power: up to 350 W rms @ MER 38 dB typ. (DVB, ISDB)
up to 400 W rms (ATSC)
UHF analogue output power: up to 600 W p.s.
Frequency agility: UHF Band IV and V
Frequency resolution: 1 Hz
Pre-correction: Adaptive
RF connector: 7/16 (f), 50 Ohm

 

 

Options to be purchased seperately:

Modulator

 

DVB-T/-H/-T2

Standard: EN300744, EN302304, EN302755 V1.3.1 (DVB-T2-Lite), TS101191, TS102773 (T2-MI), TS102034
Inputs: 4x ASI BNC (f), 75 Ohm or 2x ASI BNC (f), 75 Ohm and 2x RJ45 TS oIP 10/100/1000.
Seamless switch between ASI inputs.
Hierarchical and not hierarchical (DVB-T)
FFT: 1K (DVB-T2), 2K, 4K, 8K, 8K ext. (DVB-T2), 16K & 16K ext. (DVB-T2), 32K & 32K ext. (DVB-T2)
Code rate: All modes available according to the standard
Block Short or Normal (DVB-T2)
DVB-T: Reed-Solomon (204, 188)
DVB-T2: BCH, LDPC
Guard interval: 1/32, 1/16, 1/8, 1/4, 19/256 (DVB-T2), 19/128 (DVB-T2), 1/128 (DVB-T2)
Constellation: QPSK, 16QAM, 64QAM, 256QAM (DVB-T2). Rotated and non rotated (DVB-T2)
MISO processing: Supported

ISDB-Tb

Standard: ABNT NBR 15601, ABNT NBR 15603
Inputs: 4x ASI TS/BTS BNC (f), 75 Ohm or 2x ASI TS/BTS BNC (f), 75 Ohm and 2x RJ45 TS/BTS oIP 10/100/1000
Seamless switch between any input
FFT: Mode 1 (2K), Mode 2 (4K), Mode 3 (8K)
Code rate: 1/2, 2/3, 3/4, 5/6, 7/8
Guard interval: 1/4, 1/8, 1/16, 1/32
Hierarchical modulation: Up to 3 layers
Constellation: QPSK, 16QAM, 64QAM
Time interleaver: Fully supported
Partial reception: Supported

DAB/DAB+/T-DMB

Standard: EN 300401, ETS 300 799
Inputs: 4x ETI (NI[G703], NA5376[G704] or NA5592[G704]) BNC (f), 75 Ohm
2x ASI TS/BTS BNC (f), 75 Ohm and 2x RJ45 TS/BTS oIP 10/100/1000
Seamless switch between any input
Transmission modes: Mode I, II, III, IV (Automatically detected from the ETI stream, or user selectable)
Operation: MFN or SFN operations

ATSC

Standard: A/53, A/110
Inputs: 4x ASI / SMPTE-310M BNC (f), 75 Ohm or
2x ASI / SMPTE-310M BNC (f), 75 Ohm and 2x RJ45 TS oIP 10/100/1000
Seamless switch between any input
Modulation: 8-VSB
Input bit rate: 19.39 Mbit/s
Bandwidth: 6 MHz
Max processing delay: Up to 1 second (programmable)

Analogue

Standard: B, G, D, K, M, N, I
Inputs: Video BNC (f), 75 Ohm, audio Tini-QG “Mini XLR”, 6 Pin (m), 600 Ohm
Color system: PAL, NTSC
Integrated NICAM encoder: Available

Satellite Receiver (Option)

Standard: ETSI EN 300 421 (QPSK) (DVB-S)
ETSI EN 302 307 (QPSK, 8PSK, 16APSK) (DVB-S2)
ETSI EN 50083-9 (ASI)
ETSI EN 50221 (Common Interface)
DVB-S2: VCM, CCM, Multi Stream and Single Stream, Normal & Short FEC frames
Symbol rate: 1 – 45 Msymb/s (DVB-S)
2 – 45 Msymb/s (DVB-S2)
Constellation: QPSK, 8PSK, 16APSK
FEC: Automatic, all modalities available according to the standard.
Block Short or Normal
DVB-S: Reed-Solomon (204,188)
DVB-S2: BCH, LDPC
Roll–Off: 0.2, 0.25, 0.35
Input connector: F (f), 75 Ohm
Frequency: L–band 930÷2250 MHz
LNB control voltage: Off, +13/18 Vdc, 22 kHz, 0.25 A (overload protection)
RF input level: 40 ÷ 100 db/μV (with attenuator)
Output connector: BNC (f), 75 Ohm
Modality: 188 bytes
Max input bit rate: 80 Mbps (CAM limit: 72 Mbps)
CAM interface: PCMCIA DVB-CI Common Interface
CA mode (Conditional Access): Multicrypt, Simulcrypt
CAS Support: Mediaguard, Viaccess, Irdeto, Conax, BISS with Professional multiprogram CAM (descrambling of up to 24 Elementary Streams) Betacrypt, Cryptoworks, Nagravision with standard consumer CAM (descrambling of up to 4 services)

Repeater

RF Input

Signal type: One DTV channel (DVB-T/H/T2, ISDB-T/Tb, ATSC)
Frequency range: 170 ÷ 862 MHz (agile tuning)
Sensitivity: -75 ÷ -15 dBm (-75 ÷ 0 dBm on regenerative transposers)
Selectivity : > 60 dB ± 4.2 MHz
NF (Pi = -50 dBm): < 6 dB
Conversion type: Direct Base Band Conversion (Zero IF)
Return losses: > 15 dB
Connector: N (f), 50 Ohm

GPS / GLONASS (Option)

Input connector: N (f), 50 Ohm
Input/Monitor output 10 MHz: BNC (f), 75 Ohm
Input/Monitor output 1 PPS: BNC (f), 75 Ohm
Phase noise: -140 dBc/Hz @ 10 kHz
-150 dBc/Hz @ 100 kHz
Stability: 1e-12 / 24 H with disciplined OCXO
Hold-over stability: 5 μs after 5 hours (optional 1 μs after 24 hours)

Mechanical

Chassis: 2U rack 19”
Width: 482 mm
Height: 87.1 mm
Depth: 460.5 mm without fans
Weight: 14 Kg 

 

 

Controls

TFT touchscreen
Web GUI
SNMP
GPIO

Environmental

Operating temperature range: -5°C ÷ 40°C
Max. relative humidity: 90%, non condensing
Max. operating altitude: 2500 m. a.s.l. (>2500 m. optional)

Electrical

Power supply: Single Phase 100÷240 V∼ 50/60 Hz, IEC320 C20 Plug
Efficiency: Up to 40% efficiency in digital

Notes

To comply with the applicable standards and limit values for the suppression of out-of-band emissions (and in the case of digital standards,
also for maintaining the required shoulder distance), the transmitter may only be operated with suitable filters at the RF output.

Specifications are subject to change without notice.

Produktets tags

Der er ingen tags registreret.

Mine tags