Tilbud
ECRESO FM 5000W Modular FM Transmitter

ECRESO FM 5000W Modular FM Transmitter

202.106,00 DKK 212.743,00 DKK

Modular FM Transmitter System

Model/Varenr.: WC-TF00415-2
Styk

Ecreso FM 5000W

Modular FM Transmitter

Designed for reliability and longevity, the modular design of the Ecreso FM 5000W is based on the ECRESO FM 1500W/2000W Amplifier module.

 

This amplifier delivers the best cost/watt ratio over the lifetime of the transmitter, has the lowest heat dissipation available on the market today and, with a maximum output power of 5500W, it provides a comfortable margin over nominal power. The amplifier redundancy ensures that, even if you lose one amplifier module, you still have more than 2500W on air.

 

A crystal-clear signal is achieved using the ECRESO FM 100W exciter and its direct to channel digital modulator and the system can be fully controlled and monitored through the built-in Web interface and SNMP protocol.

POWERFUL
PERFORMANCE

Audemat ScriptEasy Powerful Performance

  • Digital FM modulator "direct to channel"
  • Highest signal quality
  • Perfect audio fidelity
  • 5-Band Sound Processor
  • Modular design
  • Protected against VSWR, temperature, over-voltage, short circuit, overload...
  • Switching power supplies with large voltage range
  • Active surge current limiting
  • Optional surge suppressor
  • MPX over AES compatibility

POWERFUL
CONTROL

Audemat ScriptEasy Powerful Control

  • Advanced Measurement Interface (AMI)
  • Intuitive web interface
  • Full SNMP management
  • Email Notifications

POWERFUL
SAVINGS

Audemat ScriptEasy Powerful Savings

  • Up to 70% efficiency
  • 6th MOSFET generation (WorldCast Systems design)
  • Reduced consumption and operational costs
  • Reduced heat and cooling costs
  • Longer component life span
  • Reduced maintenance costs
  • Built-In functionality

FEATURES

Digital Exciter

DIGITAL EXCITER

  • Digital FM modulator « direct to channel »
  • Highest signal quality
  • Perfect audio fidelity
  • Several built-in broadcast tools
  • 5 band sound processor
  • Control of all signal parameters

 

advanced control

ADVANCED CONTROL

  • Advanced Measurement Interface (AMI)
  • Intuitive Web Interface
  • Full SNMP Management

 

advanced control

UP TO 70% EFFICIENCY

  • 6th MOSFET generation (WorldCast Systems design)
  • Reduced consumption and operational costs
  • Reduced heat and cooling costs
  • Longer component life span
  • Reduced maintenance costs

 

highly reliable

HIGHLY RELIABLE

  • Protected against VSWR, temperature, over-voltage, short circuit, overload...
  • Switching power supplies with large voltage range
  • Active surge current limiting
  • Optional Surge Suppressor
  • Automatic program input switching and recovery (audio and MPX)
  • Audio Backup (from µSD card)
  • Internal RDS Backup

 

redundancy

REDUNDANCY

  • Modular design
  • Several independent amplifiers
  • Stay ON AIR despite PSU or PA Loss
  • Coupler with full unbalanced input management

 

highly reliable

5 BAND SOUND PROCESSOR

The Ecreso FM Transmitter range also features an integrated multi-band sound processor! This fully digital sound processor offers the highest signal quality and outstanding reliability as no additional hardware is required*.

 

You can choose from a wide-band or a multi-band version to achieve the level of  processing required at your site and the processor is supplied with a full set of presets for many different formats and requirements. 

 

  • Hosted in direct to frequency Digital Modulator
  • Highest quality processing from audio input to RF output
  • Powerful DSP-based processing
  • Complete 5-band architecture
  • Factory presets for all formats
  • Easy to fine tune through intuitive GUI
  • Real-time meters at each stage
  • No additional hardware:
    maximum reliability, no maintenance
    .

 

ADDITIONAL FEATURES

Advanced Communication Pack

Advanced Communication Pack

  • Intuitive and secured Web Interface (TCP/IP)
  • Advanced Measurement Interface
  • Full SNMP Management
  • Audio Backup on µSD card

 

Audio processing 5 band

Multiband Sound Processor

  • DSP based 5-band or wide-band processing
  • Presets for all applications and formats
  • Intuitive GUI to fine tune your sonic signature
  • Low distortion Final Limiter & MPX Power Limiter (ITU 412)

 

Dynamic RDS Encoder

Dynamic RDS Encoder

  • Supports PI, PS, TP, TA, MS, PTY, PTYN, DI, CT, AF, RT
  • Dynamic PS Scrolling
  • Pure and stable signal thanks to Digital Modulator
  • Delivers Audemat’s expertise in RDS

 

Single Frequency Network

Single Frequency Network

  • 10 MHz input for RF carrier synchronization 
  • Adjustable program delay (on audio / MPX inputs)
     

GPIO Boards

GPIO Boards

  • Digital GPIO Board : main alarm monitoring and control (RF off/on, Standby, Presets...)
  • OR Analog GPIO Board : with analog output voltages (forward power, temperature...)
     

Scheduler

Scheduler

  • Automatic change of preset
  • RF Power scheduling and consumption saving
  • Schedule any parameter of your ECRESO FM

 

Internal Surge Protector

Internal Surge Protector

  • Powerful protection against lightning
  • Visible status LED
  • Easy to replace

 

Email notifications

Email Notifications

  • Alarm sending by SMTP
  • Easy configuration of each notification
  • Same notifications can be sent by SNMP

 

MPX over AES

MPX over AES

  • Improved MPX signal quality
  • No hardware change
  • Compatible with MPX over IP APT codecs

 

Digital Stereo Encoder

Digital Stereo Encoder

  • High speed DSP circuitry
  • Subcarrier perfect synchronization
  • Amazing signal quality

BE PROACTIVE WITH EXPERT MAINTENANCE REPORTING

EMR is a proactive service available on ECRESO FM Transmitters. It sends the user regular reports on the status of key parameters such as temperatures, currents and voltages, plus information on the performance and lifespan of components such as the fan and power supply of the transmitter.

 

With detailed logging and trend analysis, Expert Maintenance Reporting can identify slow-burning problems and issue warnings well in advance to allow for corrective action to be taken.  A map-based display of current statuses and detailed, user-friendly reports and graphs can be accessed around the clock in the EMR user page.

CONNECT WITH WORLDCAST MANAGER

The WorldCast Manager  simplifies the management of all SNMP-enabled devices in a network, providing real-time status, historical data and visualization of multiple devices from a single screen. The intuitive and simple-to-use interface shows all devices located at your site(s) displaying product information, alerting you to any alarms and providing one-click access to the unit’s web-based control interface.

 

The WorldCast Manager is compatible with all WorldCast Systems’ equipment as well as SNMP devices from ANY manufacturer.

SPECIFICATIONS

ECRESO FM 5000W
Frequency range 87.5 to 108 MHz by 10 kHz steps
Frequency stability < 10-6 per year
HF output  1’5/8 Type,  50 Ω
Power range 500-5500 W
VSWR < 1.35, optimal performance: < 1.1 , protection : >1.5
Spurious and harmonic suppression > 75 dBc
Efficiency up to 70%
Max consumption better than 7450W
Voltage 184 VAC to 264 VAC, 47 Hz - 63 Hz
Power factor > 0.9
Fuses 10 AT (ECRESO FM 100W)
Analog input (LINE1) 2 XLR conectors, balanced, >10 kΩ (600 Ω jumpers selectable), Software adjustable level (-18/+18 dBu range)
AES Input (LINE2)  1 XLR conector, balanced, >110 Ω, software adjustable level (-20 to 0dBFS range), AES 16,24,32 bits, up to 192 kHz
2 Multiplex (MPX/SCA) inputs  2 BNC type, unbalanced, >5 kΩ, Software adjustable level (-18/+18 dBu range)
Composite operation
Bandwidth > 40 Hz to 53 kHz @ 0.1 dB,  > 20 Hz to 60 kHz @ 0.2 dB, > 60 kHz to 80 kHz @ 0.4 dB
Intermodulation distortion < 0.05%
FM S/N ratio > 80 dB RMS @ 75 kHz deviation
AM noise >55 dB, weighted/unweighted, sync/async,  RMS/CCIR (20-20 000 Hz)
Stereo operation
Bandwidth > 20 Hz to 15 kHz @ 0.1 dB
38 kHz discontinuance > 50 dB
Stereophonic crosstalk > 50 dB
Mono operation
Bandwidth > 40 Hz to 15 kHz @ 0.1 dB
Out of band rejection > 40 dB @ 19 kHz
Preemphasis 0 µs, 50 µs or 75 µs 
Environmental / Physical specifications
Overall dimensions 14U x 19"
Enclosure depth required 800 mm 
Weight ~23 kg
Operating temperature Nominal: 5°C to 45°C, Maximum: 0°C to 50°C
Storage temperature  -20°C to +70°C , < 10 years
Humidity 5 - 95 % non-condensing relative humidity
Altitude Up to 3900 m 
Cooling Air cooling performed by each module from the front panel to the rear (other configurations on demand). 
Marking CE, FCC, ICC
Standards 1999/5/CE (R&TTE), ETS 302 018 (EMC), ETS 300 384 (Radio), NF EN 60215 (Safety)
Titel Type Størrelse Download
ecreso_fm_high_power_en_low.pdf PDF 918.12KB Download

Produktets tags

Der er ingen tags registreret.

Mine tags