RØDE NT1/AI-1 Complete Studio Kit
Superior Audio Monitoring
Not only does the AI-1 deliver crystal-clear audio to your recording software, but your headphones have never sounded sweeter thanks to its discreet, high-power headphone amplifier. Audio playback is easy with a single level control and switchable zero-latency monitoring for eliminating echo while tracking vocals or instruments. The AI-1 also features balanced ¼-inch outputs for connecting your favourite speakers.
RØDE NT1/AI-1 Complete Studio Kit
Complete recording set
- NT1 large-diaphragm condenser microphone
- gold-plated and elastically mounted 1" capsule
- polar pattern: cardioid
- very low self-noise: 4.5 dBA
- Frequency response: 20 Hz - 20 kHz
- Power supply: Phantom power 24 V/48 V
- USB audio interface AI-1
- Neutrik combo jack (Mic/Instr)
- discrete Class-A preamp
- line output: 2x 6.35 mm TRS (L/R), balanced
- headphone output: 6.35 mm TRS, stereo
- direct monitoring of the recording signal switchable
- 24 bit/96 kHz digital converter
- incl. SM6 spider with integrated pop shield
- incl. microphone dust bag
- incl. XLR microphone cable (6 m)
- incl. USB-C to USB-A cable
Specifications
NT1 Specifications
Output Connection
3 Pin XLR. Balanced output between pin 2 (+), pin 3 (-) and pin 1 (ground)
Acoustic Principle
Pressure gradient
Active Electronics
JFET impedance converter with bipolar output buffer
Directional Pattern
Cardioid
Frequency Range
20Hz ~ 20kHz
Output Impendence
100Ω
Equivalent Noise
4.5 dBA SPL (as per IEC651)
Maximum Output
+8 dBu (1kHz, 1% THD into 1K Ω load)
Sensitivity
-29 dB re 1V/Pa (35mV @ 94dB SPL) ± 2dB @ 1kHz
Dynamic Range
128 dB SPL
Maximum SPL
132 dB SPL
Signal-to-Noise Ratio
90 dBA SPL (as per IEC651)
Power Requirements
24V phantom power 48V phantom power
Net Weight (grams)
395
Colour
Black
Diameter (millimetres)
50
Length (millimetres)
187
AI-1 Specifications
Computer Connectivity
USB
Form Factor
Desktop
Simultaneous I/O
1 x 2
Number of Preamps
1
Bit Depth
24-bit
Sample Rates
44.1 kHz 48 kHz 88.2 kHz 96kHz
Analog Inputs
1 x Neutrik XLR-1/4” combo
Analog Outputs
2 x 1/4” (impedance balanced) 1 x 1/4” (headphones)
Direct Monitor
Yes
USB
1 x USB Type C
Bus Powered
Yes
OS Requirements
Mac OS 10.10 or later Windows 7 or later
Power
USB bus-powered
Net Weight (grams)
560
Height x Width x Depth (millimetres)
38 x 124 x 100
Titel | Type | Størrelse | Download |
---|---|---|---|
Roede-NT1_AI1_QSG.pdf | 336.27KB | Download | |
Roede-NT1_AI1_Kit_Datasheet_03.pdf | 2.43MB | Download |