Tilbud
Glensound Vita Commentary Unit, Dante/AES67, PoE

Glensound Vita Commentary Unit, Dante/AES67, PoE

5.638 DKK 5.813 DKK

Model/Varenr.: GS-VITA
Lagerstatus: Spørg venligst om leveringstid
Styk

Glensound Vita Commentary Unit

Inputs
The main input is switchable between mic, mic+48v phantom power, and line. The input has an adjustable gain control to meet a wide range of dynamic, condenser, and ribbon microphones. The input passes through a broadcast quality dsp controlled compressor/limiter circuit prior to the A/D converters to maximize headroom and designed to manage the peaks of excited commentary. The A/D converters are full broadcast spec low noise, 48K 24bit designed for on air use.

Outputs/Talkback
There are two output circuits. One is used as the main programme audio, the other as a talkback circuit. There are separate button controls for each of these using Config+. They can each can be independently configured for latching or momentary, with the programme button also having a 'cough' feature. All talkback I/O connections are via the RJ45/CAT5 Dante network audio connection.

Monitoring
There are two monitoring inputs each with independent level control. Each of these inputs can be switched from the left ear, right ear, or both ears to the stereo headphone amplifier. The headphone amplifier is our high performance intelligent circuit which automatically adjusts its output level for high or low impedance headphones and can also drive mono earpieces and headphones.

 

There are 2 off 4 LED level meters both indicating -12 to +6 dB. One LED meter is located on the front panel to enable easy visualization of the audio levels if the VITA is being used as a table top device and the other meter is located on the top panel facing the operator when used by its beltclip.

Power
Via PoE on the network connection, or via an external DC power supply.

 

The VITA is often used as a remote link to the main commentary unit. It is favoured by pitch side interviewers, and is popular in combinations with wireless systems.

 

Features

  • Complete commentary functionality and 4W in a small belt pack format
  • Main mic/line input is electronically balanced on XLR with adjustable gain control
  • Input is switchable from line, mic, or mic + 48v phantom power
  • Low noise, high headroom mic amplifier
  • 48K 24bit A/D converter
  • Headphone output on 6.35mm jack socket
  • Two outputs: one for main programme audio, one for talk back circuit, are both on the single RJ45/CAT5 network audio connection
  • Independently configurable buttons for both outputs using Config+: latching, momentary or lazy
  • Two inputs for headphone monitoring from network audio connection, both with adjustable level
  • Headphone inputs have left/both/right switching
  • Glensound intelligent headphone amp provides correct output levels into low or high impedance headphones and can also correctly drive mono earpieces with mono jack plugs.
  • Belt clip
  • Powered via PoE, or via external 12v DC
  • Maximum Dimensions (excluding belt clip): 153 mm x 104 mm x 43mm
  • Weight (excluding battery): 355g

 

MIC INPUT GAIN RANGE
-18dBu to +12dBu

 

DYNAMIC MIC LINE UP
58dBu

 

MIC + PHANTOM POWERT LINE UP
42dBu

 

LINE INPUT LINE UP
0dBu (Gain range +/-15dB)

 

EQUIVALENT INPUT NOISE
124dBu (22-22KHz RMS gain @ max) Input terminated with 300 Ohms

FREQUENCY REPONSE (Mic-Line)
MIC: >+/-0.25dB 50Hz to 22kHz (-2dB @ 25Hz)
Line: >-0.1dB 22Hz to 22kHz

 

PHANTOM POWER
48 Volt Phantom power 

MAXIMUM INPUT BEFORE CLIPPING
Dynamic MIC: -2dBu
Mic + 48V Phantom: +12dBu
Line: +18dBu

THD+NOISE (Ref +8dBu)
100Hz = 0.016%
1kHz = 0.012%
10kHz = 0.011%

 

PPM METERS
4 x LEDS (–12,-6,0,+6 dBu with reference to prog out)

 

HEADPHONE IMPEDANCE
32 - 1000 Ohms
Auto output level to match impedance

 

MAXIMUM HEADPHONE OUTPUT LEVEL
+15.8dB into 600 Ohms

 

HEADPHONE FREQUENCY RESPONSE
>0-.1dB 22Hz to 22kHz

 

HEADPHONE NOISE
-74dB @ lineup (residual noise)

 

HEADPHONE THD + NOISE (Ref +8dBu)
0.008% @ 1kHz

 

HEADPHONE VOLUME POT RANGE
Default: +10dB to Off
Optional configuration via App: +10dB to -20dB

 

DANTE NETWORK AUDIO CONNECTION
Frequency: 48 - 96kHz
Resolution: 24 bit
CAT5 on an RJ45 connection.  Two send channels and two receive channels.

 

REMOTE CONTROL APPLICATION
Windows 10 direct install application (Not downloaded from app store)

 

POWER
External: 9 to 15V @ < 80Ma 2.5 mm Jack (inner positive) or via PoE on CAT5 connection

OVERALL SIZE
43 x 153 x 103 mm (H x W x D)

UNIT WEIGHT
420 Grams

 

MECHANICS
All aluminium construction, anodised and laser etched panels, powder coated sides

 

INCLUDED ITEMS
Handbook A5 (Download also available)
2 metre RJ45 cable
Beltclip (Fitted)

 

OPTIONAL ITEM
Switch mode power supply terminated with IEC plug

Titel Type Størrelse Download
5a674252666c4-VITA-manual-v3.pdf PDF 495.43KB Download
58ad68d1d05e1-Vita-V3.pdf PDF 2.81MB Download

Produktets tags

Der er ingen tags registreret.

Mine tags