Tilbud
EuroCaster TX600/300V DVB-T2 UHF TV Transmitter 300W RMS /600W P.S. +ampl. (analog)

EuroCaster TX600/300V DVB-T2 UHF TV Transmitter 300W RMS /600W P.S. +ampl. (analog)

108.041,00 DKK 120.157,00 DKK

High-efficiency DVB-T2 UHF TV Transmitter + 1 amplifier, 2+1 RU

Model/Varenr.: EC-TX600/300V-UHF-DVB-T2
Styk

EuroCaster´s Single channel AIR COOLED DVB-T2 UHF TV Transmitter + 1 Amplifier (analog)

TX600/300V DVB-T2 is the most outstanding last engineering achievement in a compact 2+1U Rack from EuroCaster.

The system is composed by 1  exciter (1RU) and an RF amplifier (2 RU), which makes a DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL or NTSC complete transmitter with native adaptive pre-correction circuits, built in GPS / GLONASS receiver for accurate synchronization and SFN operations, and multiple input interfaces (Satellite Receiver, ASI, ETI, EDI, Gigabit Ethernet or RF) so to be configured as Terrestrial or Satellite fed transmitter or even transposer.

 

 

Main features:

  • Compact 2+1U 19” Rack chassis
  • Output power up to 200W rms (COFDM), up to 300W rms (ATSC) or up to 600W p.s. (analogue)
  • High efficiency broadband or wideband amplifier technology both in UHF and VHF bands
  • Built in ASI/RF matrix for automatic switch over, without the need of using an external switch over unit
  • DVB-T/H/T2, ISDB-T/Tb, DAB/DAB+/T-DMB, ATSC, PAL, NTSC, NICAM modulations fully supported
  • Embedded Re-Multiplexer/Layer Combiner/TS to BTS (188 to 204 byte) converter for ISDB-Tb
  • Adaptive pre-correction circuits
  • On-board high stability GPS / GLONASS receiver with battery
  • Flexible input interfaces:
    • 4 x ASI inputs (TS, BTS, T2MI, SMPTE-310M) + Analog input
    • 2 x ASI inputs and 2 x Gigabit Ethernet
    • 4 x ETI or 2 x ETI + 2 x EDI inputs
    • 1 x DVB-S/S2 Satellite Receiver input
    • 1 x RF input
  • Easy connection to 1 or 2 OneDriver exciters

 

 

 

*The pictures shown related to this transmitter is only for illustration purpose. The specific configuration of the transmitter can be different from the picture 

 

 

Transmitters Specifications:

UHF digital output power:  200 W rms @ MER 38 dB typ. (DVB, ISDB)
 300 W rms (ATSC)
UHF analogue output power:  up to 600 W p.s.
Configurations: Single or dual driver
RF connector: 7/16 (f), 50 Ohm 
Frequency agility: UHF Band IV and V or VHF Band III
Frequency resolution: 1 Hz
Pre-correction: Adaptive
Exciter: Eurocaster TX Series

Modulator

DVB-T/-H/-T2

Standard: EN300744, EN302304, EN302755 V1.3.1 (DVB-T2-Lite), TS101191, TS102773 (T2-MI), TS102034
Inputs: 4x ASI BNC (f), 75 Ohm or 2x ASI BNC (f), 75 Ohm and 2x RJ45 TS oIP 10/100/1000.
Seamless switch between ASI inputs.
Hierarchical and not hierarchical (DVB-T)
FFT: 1K (DVB-T2), 2K, 4K, 8K, 8K ext. (DVB-T2), 16K & 16K ext. (DVB-T2), 32K & 32K ext. (DVB-T2)
Code rate: All modalities available according to the standard
Block Short or Normal (DVB-T2)
DVB-T: Reed-Solomon (204, 188)
DVB-T2: BCH, LDPC
Guard interval: 1/32, 1/16, 1/8, 1/4, 19/256 (DVB-T2), 19/128 (DVB-T2), 1/128 (DVB-T2)
Constellation: QPSK, 16QAM, 64QAM, 256QAM (DVB-T2). Rotated and non rotated (DVB-T2)
MISO processing: Supported


Analogue

Standard: B, G, D, K, M, N, I
Inputs: Video BNC (f), 75 Ohm, audio Tini-QG “Mini XLR”, 6 Pin (m), 600 Ohm
Color system: PAL, NTSC
Integrated NICAM encoder: Available

Satellite Receiver

Standard: ETSI EN 300 421 (QPSK) (DVB-S)
ETSI EN 302 307 (QPSK, 8PSK, 16APSK) (DVB-S2)
ETSI EN 50083-9 (ASI)
ETSI EN 50221 (Common Interface)
DVB-S2: VCM, CCM, Multi Stream and Single Stream, Normal & Short FEC frames
Symbol rate: 1 – 45 Msymb/s (DVB-S)
2 – 45 Msymb/s (DVB-S2)
Constellation: QPSK, 8PSK, 16APSK
FEC: Automatic, all modalities available according to the standard.
Block Short or Normal
DVB-S: Reed-Solomon (204,188)
DVB-S2: BCH, LDPC
Roll–Off: 0.2, 0.25, 0.35
Input connector: F (f), 75 Ohm
Frequency: L–band 930÷2250 MHz
LNB control voltage: Off, +13/18 Vdc, 22 kHz, 0.25 A (overload protection)
RF input level: 40 ÷ 100 db/μV (with attenuator)
Output connector: BNC (f), 75 Ohm
Modality: 188 bytes
Max input bit rate: 80 Mbps (CAM limit: 72 Mbps)
CAM interface: PCMCIA DVB-CI Common Interface
CA mode (Conditional Access): Multicrypt, Simulcrypt
CAS Support: Mediaguard, Viaccess, Irdeto, Conax, BISS with Professional multiprogram CAM (descrambling of up to 24 Elementary Streams) Betacrypt, Cryptoworks, Nagravision with standard consumer CAM (descrambling of up to 4 services)

GPS/GLONASS

Input connector: N (f), 50 Ohm
Input/Monitor output 10 MHz: BNC (f), 75 Ohm
Input/Monitor output 1 PPS: BNC (f), 75 Ohm
Phase noise: -140 dBc/Hz @ 10 kHz
-150 dBc/Hz @ 100 kHz
Stability: 1e-12 / 24 H with disciplined OCXO
Hold-over stability: 5 μs after 5 hours (optional 1 μs after 24 hours)

Mechanical

Exciter

Chassis: 1U rack 19”
Width: 482 mm
Height: 43.6 mm
Depth: 460.5 mm without fans
Weight: 7.5 Kg

RF Amplifier

Chassis: 2U or 3U rack 19”
Width: 482 mm
Height: 87.1 mm 
Depth: 460.5 mm 
Weight: 14 kg 

Controls

TFT touchscreen
Web GUI
SNMP
GPIO

Environmental

Operating temperature range: -5°C ÷ 40°C
Max. relative humidity: 90% non condensing
Max. operating altitude: 2500 m. a.s.l. (>2500 m. optional)

Electrical

Power supply: 2 hot swappable power supplies feeding one half of the amplification stages each.
Exciter: Single Phase 100÷240 V∼ 50/60 Hz, IEC320 C14 Plug
Amplifier: Single Phase 185÷264 V∼ 50/60 Hz, IEC320 C20 Plug
Efficiency: Up to 40% efficiency in digital

Notes

To comply with the applicable standards and limit values for the suppression of out-of-band emissions (and in the case of digital standards,
also for maintaining the required shoulder distance), the transmitter may only be operated with suitable filters at the RF output.

Specifications are subject to change without notice.

Produktets tags

Der er ingen tags registreret.

Mine tags